How to Choose the Right Solution for Cardboard Packaging

In secondary packaging, forming is a key stage in the process, preparing boxes and trays for subsequent operations along the line.

To ensure that the process runs smoothly, the packaging must leave the machine with the correct geometry, stability and configuration for product loading, handling and closing.

These are the factors we consider when configuring our forming machines. But what should you take into account when choosing the most suitable forming machine for your production requirements?

Let’s look at the main considerations.

From Flat Blank to Box: How a Forming Machine Works

The process starts with a flat blank.

In our forming machines, the flat blank is picked up and transformed into a box or tray through a sequence of movements determined by its geometry, ready for the subsequent stages of the packaging process.

The cycle involves picking up the blank, forming the packaging and discharging the finished box or tray. Depending on the blank, the movements required and the way the board is guided during folding may vary.

Our solutions can process solid board or corrugated cardboard and handle flat blanks of different shapes. This makes it possible to produce various types of packaging, including standard boxes, tapered trays, double-wall configurations, clamshell boxes and special designs.

The term “forming machine” therefore does not refer to a single machine configuration. While the function remains the same, the forming process varies according to the packaging structure.

Board Type, Shape and Size: Packaging Characteristics That Influence Machine Selection

Another important factor is the range of formats the machine needs to handle.

When sizing our forming machines, we consider the full range of packaging formats to be produced. Minimum and maximum dimensions, the geometry of the different blanks and the type of board all directly influence the machine configuration.

The number of formats to be handled is also important. When the same forming machine needs to process different configurations, format changeover becomes an integral part of the project and can be managed manually or automatically.

The main parameters we consider therefore include:

  • type of board;
  • blank geometry;
  • packaging dimensions;
  • range of formats to be produced;
  • frequency of format changeovers.

The blank is therefore more than just the material being processed: its characteristics provide much of the technical information needed to determine how the forming machine should operate.

Production Speed: How to Choose the Number of Forming Heads

The required production speed is another key factor when sizing a forming machine. Depending on the number of boxes to be produced per minute, we can offer solutions with a single, double or triple forming head, or, in some cases, four forming heads.

For production speeds of between 30 and 40 boxes per minute, a single-head forming machine may be sufficient, depending on the size of the blanks. When higher speeds are required, we can design machines with multiple forming heads. For example, on certain projects, we have developed four-head forming machines capable of reaching 120 boxes per minute.

However, the choice of a multi-head configuration does not depend solely on production speed. In less common applications, a double-head forming machine can be designed to process two different box formats, with one head dedicated to each format.

Glue or Interlocking: How the Closure System Affects Forming Machine Configuration

The fourth aspect to consider is the closure system.

Forming a box or tray involves more than simply folding the board. Once formed, the packaging must maintain its intended shape and configuration.

Our forming machines can therefore work with different forming and closure systems:

  • hot-melt glue;
  • cold glue;
  • hooks;
  • interlocking systems.

The choice of forming system depends on the type of application and the customer’s specific requirements.

In the Frozen Food sector, for example, boxes with hook or interlocking closures are often used, allowing the packaging to be formed without glue and therefore avoiding possible contact between the product and the adhesive. However, adhesives specifically designed for food applications are also available, so the most suitable solution is determined by the requirements of each project.

The chosen closure system also affects how the forming machine operates. A box designed with an interlocking closure requires a different sequence of movements compared with one that uses glue. The way the board is folded, the points where pressure is applied and the steps required to stabilise the final shape all vary accordingly.

The characteristics of the board can also influence how the blank behaves during the forming cycle.

Vimco Forming Machines: From Individual Formats to Complete Packaging Lines

We have been manufacturing forming machines since 1980. Alongside standard box and tray forming configurations, we can integrate specific operations such as handle application stations, edge-folding stations and systems for inserting internal dividers.

Our forming machines can operate as stand-alone units or be integrated into more complex packaging lines, together with loading units, closing machines or lidding machines.

Our solutions are used across a wide range of sectors, including Bakery & Biscuits, Chocolate & Confectionery, Frozen Food, Personal & Home Care and Non-Food / Carton Converting.

Do you need to choose a forming machine for a new packaging format or expand the range of formats your production line can handle?

Contact us